Multifunctional Drawn Arc Welder For Studs
Multifunctional welding machine has the following characteristics:
1. Multifunctional stud welding machine has two sets of parallel or separated principle stud welding machines, not only can achieve small current welding, but also high current welding. This kind welding machine has a wide welding range, covering almost all the size of welding studs in the market, and the welding efficiency is extremely clear.
2. When separated, if one of the welder fails when construction, another welder can use as usual, so that can win valuable time for the production. In inspection and repair, circuit boards can be interchanged, so that can determine the point of failure timely. Easy to repair, do not affect the production. When in parallel, welding power doubled, can be used to weld pins with large sizes.
3. Since there are 4 grounding wires in a set of multifunctional welding machine, uniformly distributed to the workpieces, effectively eliminate magnetic blow and make the seam of the welding studs more full round.
4. Parallel multifunctional welding machines are equivalent to a set of high-power stud welding machine, and separated multifunctional welding machines are equivalent to two sets of small power stud welding machines.
5. Two small stud welding machines with a chassis have low cost and light weight. The price is 75% of two sets of small power stud welding machines. That means 25% cost is saved.
6. DCD series of stud welding machines are mature products. After years of actual use, the failure rate is very low and the lifetime is up to one million times. Used in conjunction with high-tech products AJLH-III-type stud welding gun. A combined welding gun, can be used to weld various specifications of studs from 5 mm to 36 mm. High welding pass rate, easy to use.
| Power Specs |
| Power Supply Model |
DCD3600A |
| Input Voltage |
Three-phase 380VAC±10% |
Frequency |
50-60HZ |
| Output Voltage |
45-90V |
Welding speed |
5-30pcs / min |
| Rated current of Separated machine DC1800A |
90A |
Output Current |
300A-1800A(Five-speed) |
| Welding range of Separated machine |
5mm-22mm |
Single Maximum Power |
90KVA |
| Rated current of parallel machine DC3600A |
180A |
Output Current |
600A-3600A(Ten-speed) |
| Welding range of parallel machine |
6mm-36mm |
Maximum power of single machine |
180KVA |
| Welding time |
20-1500ms |
Cooling System |
Fan |
| Transformer protection |
H |
Protection class |
IP22 |
| Weight |
KG |
Dimensions(mm) |
900×640×650 |
| Settings of DC3600-type Drawn Arc Welding Gun (Parallel machine) |
| Welding method |
Stud diameter |
Power Settings |
Extended length(mm) |
Mention stretch height(mm) |
Time |
| Porcelain Biosphere |
Φ6 |
1 |
1 |
2.5 |
1.5 |
0.15 |
| Porcelain Biosphere |
Φ8 |
1 |
1 |
2.5 |
1.5 |
0.25 |
| Porcelain Biosphere |
Φ 10 |
1 |
2 |
3.0 |
1.5 |
0.2 |
| Porcelain Biosphere |
Φ 12 |
1 |
2 |
4.0 |
1.5 |
0.3 |
| Porcelain Biosphere |
Φ 13 |
2 |
2 |
4.5 |
1.5 |
0.25 |
| Porcelain Biosphere |
Φ 14 |
2 |
2 |
4.5 |
1.5 |
0.25 |
| Porcelain Biosphere |
Φ 16 |
2 |
2 |
4.5 |
1.5 |
0.3 |
| Porcelain Biosphere |
Φ 19 |
2 |
3 |
2.5 |
6 |
0.45 |
| Porcelain Biosphere |
Φ 22 |
3 |
3 |
3 |
6 |
0.3 |
| Porcelain Biosphere |
Φ 25 |
3 |
4 |
3 |
6 |
0.4 |
| Porcelain Biosphere |
Φ 28 |
4 |
4 |
3 |
6 |
0.4 |
| Porcelain Biosphere |
Φ32 |
4 |
5 |
3 |
6 |
0.5 |
| Porcelain Biosphere |
Φ36 |
5 |
5 |
3 |
6 |
0.6 |
){kind=link}